'I recently replaced my computer system disk with a new SSD disk. Now the problem is that I cannot boot from the SSD, how to solve this issue?'
- Sun Stk Raid Rem Driver Download For Windows 10 7
- Sun Stk Raid Rem Driver Download For Windows 10 64-bit
- Sun Stk Raid Rem Driver Download For Windows 10 32-bit
- Sun Stk Raid Rem Driver Download For Windows 10 Download
- Sun STK RAID REM Driver Download For Windows 10
If you are running into the same problem and trying to fix it on your own, follow the three solutions here.
- Select the type and then model of the HBA that you want (SG(X)-SAS6-REM-Z). Select and download the specific Windows driver that is supported by the Windows release on your hardware platform. Select and download the corresponding Readme file for the Windows driver, and follow the instructions in the Readme file to complete the driver installation.
- If your server is equipped with a Sun StorageTek RAID controller card, perform the following procedure, To Install Driver Directly Onto the Server. LSI does not provide Solaris support for its RAID management software. If your server is equipped with an LSI SAS3081E-S controller card, you must manage RAID using the controller card’s BIOS.
| Workable Solutions | Step-by-step Troubleshooting |
|---|---|
| Fix 1. Boot Windows from BIOS | Use a SATA cable to connect the SSD, restart...Full steps |
| Fix 2. Rebuild SSD and set to active | Click 'WinPE Creator' to create a bootable...Full steps |
| Fix 3. Fix BCD and boot | Check solutions to either an MBR or GPT SSD...Full steps |
| Fix 4. Watch Video Tutorial for effective solutions | Video guide on how to correct BCD errors after System clone. Full steps |
Causes of Windows not Booting from SSD Error
The cases mentioned above are two real problems that happen to SSD users on Windows 10, 8 or 7 computers. Most of them don’t know how this problem happens and none of them have solutions to fix these troubles. If you are one of them, don’t worry. We have solutions for you. Let’s figure out why or how does your computer cannot boot on SSD drive first. Why does this error show up? Basically, this error occurs in these situations:
- System disk upgrade: computer won’t boot from new SSD after upgrading disk from HDD to SSD.
- Windows system error/failure.
- Computer fails to boot after the system update.
- SSD disk internal error.
- The SSD is cloned and won't boot.
After you have figured out the reasons, you are able to solve this case. Here are some tried and true solutions to deal with the SSD booting error. If you'd like a fresh try, you can follow this page to Install or Migrate Windows OS to SSD without boot issue.
Solutions 1. Set Windows to Boot from SSD via BIOS
If your computer cannot boot after upgrading or replacing system disk from HDD to SSD, the proper reason for this problem is that you may fail to reset the boot order in BIOS. To change the boot mode, you can refer to the following to configure it:
Android SDK is a freeware AVD management software download filed under programming software and made available by Google for Windows. The review for Android SDK has not been completed yet, but it was tested by an editor here on a PC and a list of features has been compiled; see below.
1. Use a SATA cable to connect the SSD to your computer.
2. Restart your PC. Continuously press a specific key (usually F2, F8, F12, Del) to enter BIOS Setup.
3. Then, use the arrow keys to select Boot Option. Here, you can change the boot order to boot from the cloned SSD.
Solution 2. Rebuild the SSD and Set it as Active
For this case, we suppose your SSD is MBR. Once MBR (Master Boot Record) disk is damaged, the system cannot be booted. In this situation, to rebuild MBR rather than reinstall the Windows will be much more convenient and time-saving. You only need to do two things: rebuilding the MBR and setting it active.
EaseUS Partition Master has already offered the function to rebuild MBR in the case of boot failure due to MBR problems.
Sun Stk Raid Rem Driver Download For Windows 10 7
Note: Since your PC cannot boot from the SSD properly, connect the MBR hard disk to another working computer for repair. Or create a WinPE bootable disk to make your computer bootable.
To Rebuild MBR:
Step 1.Create a WinPE bootable disk.
- Download and launch EaseUS Partition Master on a new PC which runs the same system as yours.
- Click 'WinPE Creator' on the toolbar. And select to create the bootable disk on a USB drive. If your computer has a CD/DVD drive, you can also create the bootable disk to CD/DVD.
- Click 'Proceed' to finish the process.
Step 2.Rebuild MBR.
- Connect the bootable USB or CD/DVD to your PC.
- Press 'Del' when you are restarting the computer. Boot your computer from 'Removable Devices' or 'CD-ROM Drive'. And then EaseUS Partition Master will run automatically.
- Right-click the disk whose MBR is damaged. Choose 'Rebuild MBR' to continue.
- Select the type of MBR with the current operating system. Then, click 'OK'.
- Click the 'Execute 1 Operation' button at the top-left corner and click 'Apply' to build the MBR. After that, your computer can boot normally again.
After you have rebuilt the SSD, you need to set the system partition as active.
To Set an Active Partition:
You still need the partition magic software to help you set the system partition active.
- Important
- Before you make a partition active, you must make sure it is formatted and contains an operating system. Otherwise, your PC cannot boot from this partition!
- If you set a partition as active and there was another active partition on the disk, it will be unset automatically. This might also prevent your PC from booting.
1. Select a primary partition to set as active from the list in the main window of EaseUS Partition Master.
2. Select Partitions > Set active.
3. By clicking OK, you will add the pending operation of setting active partition.
Then you can reboot your computer and boot from the SSD. If you still cannot boot from the SSD, the BCD error might be the main cause.
Solution 3. Fix the BCD Error to Make the SSD Boot
MBR and GPT SSD have different steps, find the solutions respectively to solve the BCD error and then boot from your SSD.
1 - The SSD is MBR.
Sun Stk Raid Rem Driver Download For Windows 10 64-bit
Step 1. If the system partition doesn't have a drive letter, assign one for it.
- Open Disk Management under Storage by right-clicking Computer/This PC > Manage.
- To assign a drive letter if one has not already been assigned, select the partition, click Add, click the letter that you want to use, and then click OK.
Step 2. Run Command Prompt as administrator.
Here, we suppose the system partition is E: Then, run the command:
bcdedit /store E:bootbcd
Check that the System and boot pointers are correct after running. If they are not correct, use the /set command to fix them. For example, if the system partition should be M: it becomes E: You can follow this to fix it:
Sun Stk Raid Rem Driver Download For Windows 10 32-bit
Bcdedit /store M:bootbcd /set {bootmgr} device partition=M:
2 - The SSD is GPT.
Step 1. Set the partition ID as basic ID.
The BCD mode on the GPT system is similar to the MBR, except that the GPT system disk is an EFI partition. You need to modify the partition ID to the Basic data partition ID by using the Diskpart set command on the EFI partition.
set id=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Step 2. Assign the drive letter and view BCD information
Then assign the drive letter. If the assigned drive letter is M:, then run the BCD edit command to view the BCD information.
bcdedit /store M:EFIMicrosoftBootBCD
Sun Stk Raid Rem Driver Download For Windows 10 Download
If the partition is pointed to an error, use the /set command under BCD edit to modify it correctly. The modification is the same as that in the MBR. If there is a startup problem after modifying the BCD correctly, you need to check the Active partition is set for the MBR disk while the GPT system disk needs to add the startup item. If you still have the problem, you can also contact us.